Section J and commercial building facade design: NCC 2022

Thomas Dixon Centre, Brisbane, by Conrad Gargett. Traditional land owners: Yuggera and Turrbal people (Image: Christopher Frederick Jones)

Section J of the National Construction Code (NCC) Volume One codifies minimum glazing thermal performance measures for both facade vision glazing and roof lights.

NCC 2019 contained the first major revision to the Section J measures in nine years. A significant change was the amalgamation of the external wall insulation requirements with facade glazing requirements into a new Part J1.5 in NCC 2019. This is now called Part J4D6 ‘Walls and glazing’ in NCC 2022. This requirement in the code accounts for the significant detrimental effects of thermal bridging through metal framing within wall construction.

The continuing difficulty with Section J is that it fails to explain succinctly to a designer what a compliant design might look like. This paper attempts to address this failure by presenting a range of strategies and design charts for different climate zones to enable building designers to quickly design high-performance, NCC-compliant facade concepts.

This note updates and replaces Environment Issue 04 October 2019 (edited April 2020) NCC 2019 Section J and Commercial Building Facade Design to reflect the minor commercial energy efficiency changes introduced into NCC 2022. Transition arrangements apply in some states and territories where NCC 2019 Section J clauses can still be used beyond the NCC 2022 adoption date of 1 May 2023. Refer to your jurisdiction’s building authority for the relevant state and territory adoption dates.

Related courses - Available via Online CPD
note summary
  1. Introduction
  2. Key concepts
  3. Graphs
  4. Example of a glazing concept using the WWR graphs
  5. Summary and further recommendations
  6. Glossary of terms
  7. References and further reading
Download the full note PDF 2MB
Download
Disclaimer

This content is provided by the Australian Institute of Architects for reference purposes and as general guidance. It does not take into account specific circumstances and should not be relied on in that way. It is not legal, financial, insurance, or other advice and you should seek independent verification or advice before relying on this content in circumstances where loss or damage may result. The Institute endeavours to publish content that is accurate at the time it is published, but does not accept responsibility for content that may or has become inaccurate over time. Using this website and content is subject to the Acumen User Licence.

Was this note helpful?

We are always looking to improve our content and your opinion is important to us. If you have any feedback or suggestions on how this article could be more relevant and useful, please outline below.

Related Notes

Performance Solutions
Project
23 August 2023
National Construction Code (NCC)
Project
29 August 2019
Optimising environmental performance
Environment
31 October 2017

Recently Viewed

As-built documentation
Project
24 January 2024
Business continuity and disaster planning
Practice
24 January 2024
Slip resistance design considerations
Project
14 December 2023
Slip resistance compliance and testing
Project
14 December 2023
Ecological connectivity design strategies
Environment
29 November 2023